Descriptions:
• The NV-IPIS-S11-S05 is a IP based coaxial ceiling speaker is powered by PoE+network switch through
CAT5 or CAT6 connection – no external power supply is required.
• Built-in Class D amplifier provides effective use of power,the system outputs rated power Power: 25W
(when POE power supply), 30W (DC24V/2A).
• The speaker unit in the system is of the coaxial type with an 6.5 woofer of polypropylene,an inverted
rubber surround,and a 1 polyamide soft dome tweeter mounted on a post,these two drivers are coupled
through a built-in capacitor bypass crossover.
• This speaker system has excellent dispersion,wide bandwidth and a smooth frequency response which
makes this the top choice for voice paging,playing music,emergency notification alerting and bell
scheduling applications.
Features:
• 6.5 inch woofer + 1 inch tweeter.
• Support protocol: RTP, UDP, TCP/IP, FTP.
• Support POE general international standard IEEE 802.3at (25.5W) protocol.
• Integrated Class D amplifier.
• PoE+powered without a need for local power.
• RJ45 connection for audio from PoE+Ethernet.
• 6.5” polypropylene cone with inverted rubber surround.
• 1” Polyamide dome tweeter.
Technical Specification:
Amplifier Type | Class D |
Power Supply | PoE or DC24V(2A) |
Rated Power | Power Over Ethernet: 25W
DC24V(2A): 30W |
LAN Connector | RJ45 |
DC24V Connector | Phoenix connector |
Transmission Speed | 100Mbps |
Communication Protocol | TCP/IP, UDP, IGMP |
Sampling Rate | 8K~48KHz |
Audio Bit Rate | 8K~512Kbps |
Speaker Driver | 6.5” woofer, 1” tweeter |
Sensitivity(1m,1w) | 89dB±3dB |
Frequency Response | 90Hz~20KHz(±3dB) |
Dimensions (mm) | Ø240*155mm |
Cutting Hole (mm) | Ø210mm |
Material | ABS enclosure,metal grille |
Net Weight (kg) | 2.4 kg |